Performance monitor, Interface alarms – H3C Technologies H3C Intelligent Management Center User Manual
Page 385
371
From the Interface Details page, you can view information for the selected interface. In addition, you can
configure the selected interface from the Port Properties page. Menu options for Port Properties change
based upon the device as well as the interface.
To view port information and to configure an Ethernet or Gigabit Ethernet port:
1.
Click the Port Properties link located under the Interface Management section of the right
navigation tree on the selected interface's Interface Details page and do the following:
a.
Enter a name for the interface in the Port Alias field. Valid entry is 1-64 characters.
b.
Select the administrative status for this port from the Administrative Status list.
c.
Select the port priority from the Port Priority list.
d.
Select the speed of the port from the Configured Rate list.
e.
Select the broadcast suppression type from the Broadcast Suppression Type list.
f.
Enter the broadcast suppression value from the Broadcast Suppression field.
g.
Select the duplex mode for this interface from the Configured Duplex Mode list.
h.
Enable or disable flow control from the Flow Control Status list. To enable flow control, select
True. To disable flow control, select False.
i.
Select the link type from the Link Type list. Options include Trunk, Access, Hybrid, and Fabric.
j.
Select the MDI mode from the MDI Mode list. Options include Normal, Across, and Auto.
2.
Click OK to accept your changes.
The Port Information window updates with the results of the VLAN interface configuration. When
configuring a virtual interface, you only need to configure Port Alias and Administrative Status.
For more information about the configuration options available on the switch Port Information
page, refer to your switch vendor's documentation.
Performance Monitor
From the Interface Details page, you can monitor the performance indexes for the interface in real time.
To do that:
1.
Click the Interface Real-Time Monitoring link located under the Performance Monitor section of the
right navigation tree on the selected interface's Interface Details page.
2.
Click Add to select one or more monitor indexes.
The system automatically selects Interface Receiving Rate, Interface Transmitting Rate, Interface
Inbound Bandwidth Usage, and Interface Outbound Bandwidth Usage as the default monitor
indexes and the current interface as the monitor object for each index.
3.
Click the checkbox to the left of the instances you want to monitor.
4.
Click OK to add the interface real-time monitor.
Interface Alarms
From the Interface Details page, you can view all alarms on the interface.
To do that:
1.
Select Interface Alarms > View Interface Alarms from the navigation tree.
The All Alarm page appears. The interface alarm query criteria are automatically displayed in the
query criteria area, and all alarms on the interface are displayed on the interface.