H3C Technologies H3C Intelligent Management Center - Manual (Page 502)

488
Property
name
Description
Require
d
Remarks
serviceName Service name Y
It must be consistent with the serviceName field in the
background script.
actionName Action name Y
It must be consistent with the actionName field in the
background script.
operType Operation type Y
Enumerated value: 1 (deploy configuration) or 2 (get
configuration)
operMode Operation mode N
Enumerated value: 0 (any), 1 (SNMP), or 2 (CLI). The default
is 0.
transProtocol
Transmission
protocol
N
Enumerated value: 0 (any), 1 (TFTP), 2 (FTP), or 3 (SFTP). The
default is 0.
execMode Execution mode N
Enumerated value: 1 (synchronous) or 2 (asynchronous). The
default is 1.
timeout
Timeout time (in
seconds)
N The default is 300 seconds.
Example 5:
<Asn1Action id="getXXXXAction" serviceName="getXXXX" actionName="getXXXX" operType="2"
timeout="300">
<Parameter name="devId" value="$(DEVICE_ID)"/>
<Parameter name="vlanId" value="1"/>
</Asn1Action>
Parameter
The Parameter element, shown in Table 14 is used to define parameters for operations. Each parameter
can define its own view, and whether to perform initialization, and if yes, how to perform initialization.
For the view and initialization description, see later sections.
The common configuration framework generates the dynamic interface for only the primary action
(identified by the actionName property of the Operation element). The sequence of parameters on the
interface is consistent with that defined in the registration file.
Table 14 Properties supported by the Parameter element
Property
name
Description Required Remarks
name Parameter name Y
A character string consisting of letters or digits; unique in
an action.
value Parameter value N
Supports replaceable variable.
The system does not generate dynamic interface for the
parameter whose variable is replaced.
label
Parameter
display name
N
A resource string starting with %.
If it is null, the name value is displayed.
required Required or not N The value can be true or false. The default is true (required).