Adding a work period – H3C Technologies H3C Intelligent Management Center User Manual
Page 227
213
The workday configuration page appears. The workdays are scheduled into short work periods.
{
Name: Contains the name of the work period.
{
Start Date: Contains the start date of the work period.
{
End Date: Contains the end date of the work period.
{
Details: Contains the working time ranges of the workdays in the work period. Working time
ranges are displayed in green. Free time ranges are displayed in gray.
{
Description: Contains a description of the workday.
{
Modify: Contains a link for entering the page for modifying the work period.
{
Delete: Contains a link for deleting the work period.
3.
Click Refresh to update the Workday page.
Adding a work period
Operators can add a work period and set the workdays and working time ranges for the work period.
To add a work period:
1.
Navigate to System > Work Time Settings:
a.
Click the System tab from the tabular navigation system on the top.
b.
Click System Configuration section of the navigation tree on the left.
c.
Click
Work Time Settings under System Configuration from the navigation system on the
left.
The Work Time Settings page appears.
2.
Click the Workday tab.
3.
Click Add to enter the Add Workday page.
4.
Enter the name of the work period in the Name field.
5.
Enter a start date of the valid time range of the work period in the Start Date field, or click the field
to select a start date. The valid date format is YYYY-MM-DD.
6.
Enter an end date of valid time range of the work period in the End Date field, or click the field to
select an end date. The valid date format is YYYY-MM-DD.
7.
Enter a description of the work period in the Description field.
8.
In the Work Time Settings area, configure the working time ranges of the workdays on a weekly
basis:
a.
Click Add to launch the Add Time Range window.
b.
Select the days in a week that you want to set as workdays. Options include Monday through
Sunday.
c.
Select the start time of the working time range in each workday from the Start Time list.
d.
Select the end time of the working time range in each workday from the End Time list.
e.
Click OK.
Repeat Steps a through e to add more working time ranges. Any two working time ranges
cannot overlap with each other.
f.
Click the Delete icon of a time range to delete the time range.
9.
Select workdays from special workdays as needed:
{
Enable: Allows operators to select workdays from existing special workdays.
{
Disable: Prohibits operators from selecting workdays from existing special workdays.