Vlan – H3C Technologies H3C Intelligent Management Center User Manual
Page 403
389
Click the checkbox to the left of the parameters you want to select, or
To select all operations of a certain type, click on the checkbox to the left of the type.
7.
Click OK.
8.
Confirm that the operations you have selected now appear in the Operation List.
9.
Click the icon in the Delete field to delete the association operation.
10.
Click one of the icons in the Sort field to reorder the operations in the Operation List:
{
Use to move the operation up one position.
{
Use to move the operation to the top of the parameter list.
{
Use to move the operation down one position.
{
Use to move the operation to the bottom of the list.
Operations are executed in the order that they are sorted.
11.
Click Add under the Device List to select the devices to apply this batch mode operations to.
You can add devices using either the View or Advanced query option. See "
" and "
Adding devices by Advanced query
12.
Click Next.
13.
To configure parameters for the operations, do one of the following:
VLAN
Add VLAN
•
VLAN ID: Enter the VLAN ID.
•
VLAN Name: Enter a name for the VLAN.
Delete VLAN
•
VLAN ID: Select a VLAN from the VLAN ID list. The selected VLAN is deleted from all selected
devices, and the VLAN must already exist in the IMC.
When you configure multiple devices at a time, the available VLAN IDs are the intersection of the VLANs
on all devices.
Modify VLAN Name
•
VLAN ID: Select a VLAN from the VLAN ID list.
•
VLAN Name: Enter a new name for the VLAN.
Add VLAN Interface
•
VLAN ID: Select a VLAN from the VLAN ID list.
•
IP Address Type: Select a type for the virtual interface from the IP Address Type list.
•
DHCP Enabled: Specify whether to enable DHCP. With DHCP enabled, the virtual interface obtains
an IP address from the DHCP server.
•
IP Address: Enter an IP address for the virtual interface. This property is required if you do not
enable DHCP.
•
Mask: Enter a mask for the IP address in dotted decimal notation, such as 255.255.255.0. This
property is required if DHCP is not enabled.
Delete VLAN Interface
•
VLAN ID: Enter the VLAN ID you want to delete. IMC deletes the specified VLAN interface, but does
not delete the VLAN.