H3C Technologies H3C Intelligent Management Center - Manual (Page 410)

396
{
Enable Untagged VLAN: Specify whether to enable the untagged VLAN feature.
{
Untagged VLAN: Enter the untagged VLAN IDs if you have enabled the untagged VLAN
feature.
{
Enable Forbidden VLAN: Specify whether to enable the forbidden VLAN feature. If you enable
the feature, you can prevent the hybrid port from being assigned to the specified VLAN.
{
Forbidden VLAN: Enter the forbidden VLAN IDs.
• Modify Hybrid Port
{
PVID: Enter the port VLAN ID (PVID).
{
Tagged VLAN: Enter the tagged VLAN IDs.
{
Enable Untagged VLAN: Specify whether to enable the untagged VLAN feature.
{
Untagged VLAN: Enter the untagged VLAN IDs if you have enabled the untagged VLAN
feature.
{
Enable Forbidden VLAN: Specify whether to enable the forbidden VLAN feature. If you enable
the feature, you can prevent the hybrid port from being assigned to the specified VLANs.
{
Forbidden VLAN: Enter the forbidden VLAN IDs.
• Add Trunk Port
{
PVID: Enter the PVID of the trunk port.
{
Allowed VLAN: Enter the VLAN IDs allowed on the trunk port.
• Modify Trunk Port
{
PVID: Enter the PVID of the trunk port.
{
Allowed VLAN: Enter the VLAN IDs allowed on the trunk port.
When you configure multiple devices at a time, the VLAN IDs available for selection are the
intersection of the VLANs of all devices.
17. Click the Set icon for an operation and select Copy from the shortcut menu to copy the
operation to create a new operation, which uses the default parameters. Click the Set icon for
an operation and select Delete from the shortcut menu to delete the operation.
You can apply up to 30 operations (including operations of the same name) at a time. If you apply
more than 30 operations, the copying operation fails, and you cannot enter the next configuration
procedure.
18. Click Next to enter the Set Task Attributes page.
19. Enter a name for this task in the Task Name field.
20. Select the type of deployment schedule you want to apply to this task from the Schedule Type list:
{
Select Once if you want IMC to execute this task one time.
{
Select Cycle if you want this configuration deployment task to be executed on a scheduled
basis.
21. If you select Once in the Schedule Type field, complete the following steps.
Select the time you want IMC to execute this task from the Schedule Time list. Options include
Scheduled and Immediately.
a. If you selected Scheduled, click the field to populate the date and time for the execution of this
task.
A popup calendar appears.
b. Select the date from the calendar.