H3C Technologies H3C Intelligent Management Center - Manual (Page 352)

338
1. Click the Address Binding link located under the Device Management section of the right
navigation tree on the selected device's Device Details page.
For information on navigating to a device's Device Details page, see "
Viewing devices with Device,
IP, and Topology Views " and " Viewing devices with custom views ."
The MAC-Port Binding Management page appears.
2. From the MAC-Port Binding Management table, click on the checkboxes to the left of the
MAC-Port binding configuration you want to delete.
3. Click Delete.
4. Click OK to confirm deletion of the selected items.
To configure the global MAC address learning configuration
1. Click the Address Binding link located under the Device Management section of the right
navigation tree on the selected device's Device Details page.
For information on navigating to a device's Device Details page, see "
Viewing devices with Device,
IP, and Topology Views " and " Viewing devices with custom views ."
The MAC-Port Binding Management page appears.
2. Click the Global MAC Address Learning Configuration tab.
3. Enter the MAC address aging time in seconds in the MAC Address Aging Time field.
Valid range is 10–1000000. The value -1 entered in this field indicates no limit to MAC address
aging.
4. Click OK.
To modify a port MAC address learning management
1. Click the Address Binding link located under the Device Management section of the right
navigation tree on the selected device's Device Details page.
For information on navigating to a device's Device Details page, see "
Viewing devices with Device,
IP, and Topology Views " and " Viewing devices with custom views ."
The MAC-Port Binding Management page appears.
2. Click the Port MAC Address Learning Management tab.
3. Click the Modify icon associated with interface you want to modify.
4. Enter the maximum learnable MAC address in the Max Learnable MAC Addresses field.
Valid range is 1–1048576. The value –1 entered in this field denotes no limit.
5. Click OK to accept your configuration.
Hardware information
From the Hardware Information link under Device Management, you can view information about
selected routers, switches, and wireless devices. The information provided in this view may vary by
device type but most network device types provide Device Information, Module Information, Port
Information, Power Information, and Fan Information.
To view hardware information for the selected device from the Device Details page:
1. Click the Hardware Information link located under the Device Management section of the right
navigation tree on the selected device's Device Details page.
For information on navigating to a device's Device Details page, see "
Viewing devices with Device,
IP, and Topology Views " and " Viewing devices with custom views ."
The Hardware Information page appears.