H3C Technologies H3C Intelligent Management Center - Manual (Page 346)

332
{
2—The request is being processed.
{
3—The request is processed successfully.
{
4—The request fails.
• PowerZone Distribution: An external power supply has 1 to 4 zones. Each zone has 1 to 4 slots: A,
B, C, and D. For example, "1A, 1B" indicates that the slot A and slot B in the zone 1 are being
used.
• Power Zone Mode(Force/Balance Mode): Force mode, When power shortage occurs, lower-priority
switches that belong to a zone are suspended from being powered. Balance mode, When power
shortage occurs, power is allocated to switches that belong to a zone and no switch will be
suspended from being powered.
• Number of Supported Switches: Number of switches that can be powered by the current zone. This
value range is 1 to 4 because each zone has 4 slots at most.
• Serial NO.: Serial number of the power supply.
• Model: Model of the power supply.
• Type: Type of the power supply.
• Voltage(V): Voltage of the power supply.
• Wattage(W): Wattage of the power supply.
• Connection State: Connection state of the power supply.
• Modify: Click the Modify icon for an external power supply to modify its configuration
parameters.
Modifying HP640 external power supply configuration parameters
1. Click the HP Power Management link located under the Device Management section of the right
navigation tree on the selected device's Device Details page.
2. Click the Modify icon for the HP640 external power supply.
The page for modifying the HP640 external power supply appears.
3. Modify the following parameters as needed:
{
Reset to Factory Default Settings: Whether or not reset the external power supply to factory
default settings.
{
Enable Power: Enable or disable the external power supply.
{
Enable Power Auto-recovery: Enable or disable the external power supply auto-recovery.
{
Power Zone Distribution: Modify the external power supply zone distribution.
{
Power Zone Mode(Force/Balance Mode): Modify the external power supply zone mode to
Force Mode or Balance Mode.
{
Number of Supported Switches: Modify the number of switches that can be powered by the
current zone.
{
Connection State: Connection state of the power supply. You cannot modify this field.
4. Click OK.
Mirror group
You can add, edit, and delete mirror groups for devices.
Displaying mirror group information