Resource statistics report, Alarm analysis reports – H3C Technologies H3C Intelligent Management Center User Manual
Page 1044
1030
Resource statistics report
Reports found under the Resource Statistics Reports section of My Real Time Reports provide you with
information about devices managed by IMC including device summaries, port utilization and capacity,
device connectivity, device changes, and device type. Specifically, the Resource Statistics Reports section
of the My Real Time Reports includes the following pre-defined reports:
•
Capacity Report: Provides a list of total and available ports for each device managed by IMC.
•
Changes Report: Identifies device changes that have occurred since the last discovery. The report
reports on the old settings as well as the current or changed settings.
•
Device Asset Report: Shows device asset information including stack information and slot
information.
•
Device Category Statistic Report: Provides a distribution of devices by IMC category or type. For
more information about device categories, see "
•
Device History Report: Provides a history of configuration changes to devices including device label
changes and configuration changes to interface status.
•
Device Summary Report: Provides a statistical summary of devices managed by IMC. It reports on
the distribution of devices by device category, by status, and by vendor. It also provides you with a
distribution of device alarm status by IP segment.
•
Discovery Report: Provides a list of problems that IMC encountered while performing a network
discovery.
•
Inventory Report: Lists all devices discovered by IMC by MAC address and by the IP address of the
access device that the MAC address is associated with.
•
Misconfigurations and Optimizations Report: Identifies devices that are configured with the default
SNMP read and write community strings.
•
Topology Report: Provides a list of all devices managed by IMC and the devices they connect to. For
both devices, IMC provides the device name, IP address, device type, port information, and the
status of this link.
•
User Tracking Report: Describes MAC information on the switch devices managed by IMC.
Alarm analysis reports
Reports found under the Alarm Analysis Reports section of My Real Time Reports provide you with
information about failures on devices, interfaces, and links managed by IMC including availability
statistics, outage durations, distribution statistics on outage durations, and causes when the cause is
available. Statistics can be collected for all Alarm Analysis Reports. Specifically, the Alarm Analysis
Reports section of the My Real Time Reports includes the following pre-defined reports:
•
Device Connectivity Detail Report: Provides details for devices that reported availability problems.
This report includes statistics on the duration of downtime, distribution of the length of the outage in
minutes, and the cause for the outage when available.
•
Device Connectivity Summary Report: Provides availability statistics for devices managed by IMC.
This report also includes statistics on outage duration and a distribution of outage durations for
each device.
•
Interface Connectivity Detail Report: Provides details for interfaces that reported availability
problems. This report includes statistics on the duration of downtime, distribution of the length of the
outage in minutes, and the cause for the outage when available.