H3C Technologies H3C Intelligent Management Center - Manual (Page 538)

524
Consider using the devices to which the template is applied and what the template contains, if
using a segment template type. For segment configuration templates, consider naming the
template by the type of function or commands contained within the template.
19. Click OK.
Manually adding a configuration template
To manually create a configuration template:
1. Navigate to Service > Configuration Templates.
a. Click the Service tab from the tabular navigation system on the top.
b. Click the Configuration Center on the navigation tree on the left.
c. Click the Configuration Templates under Configuration Center from the navigation system on
the left.
All root configuration template folders and configuration templates stored at the template folder
root level display in the Configuration Templates list.
2. Navigate to the folder that you want to add a configuration template to.
3. Click Add.
4. Select Manual Add from the popup menu.
5. Enter a name for the template in the Template Name field.
Configuration template names cannot begin or end with a period (.). Spaces in the configuration
template name are also not permitted. In addition, the characters in
Table 24 are not permitted in
a configuration template file name.
Table 24 Invalid characters
Character Name Character Name
* Asterisk ' Apostrophe or single quotation
| Vertical bars : Colon
\ Backslash " Double quotation
/ Forward slash < > Angle brackets
? Question mark
6. Select the type of template you want to create from the Template Type list. Template type options
include File, Segment and CLI Script.
A file template type creates an entire configuration file that is then applied to the device by using
the deployment option.
A segment template type creates only a portion of a configuration field, which is then applied to
the device. For example, if your organization uses SNMP community strings that vary by location,
you can create a configuration file by using a segment template type for just the SNMP community
string configuration for each location and then deploy that configuration template to devices by
location.
A CLI script template type creates a CLI configuration file, which is then applied to the device
through telnet.
7. Select the configuration template folder you want to save this template to from the Folder list.
8. Select the device type you want to create this configuration template for by clicking the Select
Model button to the right of the Applicable Devices field.