H3C Technologies H3C Intelligent Management Center User Manual
Page 355
341
The Modify Group page appears.
Select a new MDC from the MDC Name list.
4.
Click OK.
Viewing MDC disk management details
1.
Access the MDC Management page.
2.
Click the Disk Management tab.
Disk Management List contents
{
Slot—Description of the card.
{
Chassis No.—Number of the chassis to which the card belongs.
{
Slot No.—Number of the slot to which the card belongs.
{
MDC Name—Name of the MDC that is authorized to use the card. The default MDC always
uses the name Admin.
{
Disk Name—Name of the disk in the card.
{
Quota (%)—Maximum percentage of the disk space that MDC can use.
{
Quota (KB)—Maximum amount of the disk space that MDC can use. The value equals the total
disk size multiplied by Quota (%).
{
Reserved (KB)—Minimum amount of the disk space that must be reserved for the MDC.
{
Used (KB)—Amount of the disk space that is used by the MDC.
{
Available (KB)—Amount of the disk space that is available for the MDC. If the amount of the
free space is smaller than Quota (KB) minus Used (KB), the amount of the available disk space
for the MDC is that of the free disk space. If the amount of the free space is larger than Quota
(KB) minus Used (KB), the amount of the available disk space for the MDC equals Quota (KB)
minus Used (KB).
{
Modify—Click the Modify icon to modify the maximum disk space percentage for an MDC.
Modifying the maximum disk space percentage for an MDC
1.
Access the MDC Management page.
2.
Click the Disk Management tab.
3.
Click the Modify icon for the MDC for which you want to modify the maximum disk space
percentage.
The Modify Quota page appears.
4.
Enter a new disk space percentage in the Quota (%) field.
5.
Click OK.
Viewing MDC memory management details
1.
Access the MDC Management page.
2.
Click the Memory Management tab.
Memory Management List contents
{
Slot—Description of the card.
{
Chassis No.—Number of the chassis to which the card belongs.
{
Slot No.—Number of the slot to which the card belongs.
{
MDC Name—Name of the MDC that is authorized to use the card. The default MDC always
uses the name Admin.