H3C Technologies H3C Intelligent Management Center - Manual (Page 795)

781
b. Click ACL Management section of the navigation tree on the left.
c. Click the Assistant link located under ACL Management on the navigation tree on the left.
d. Click the Service List option located in the Assistant Management portion of the Service List
page.
The Service List displays in the main pane of the page.
2. Click the service name in the Name field.
The View Service page appears.
Service list
• Name: Contains the name of the service.
• Description: Contains a description for the associated service.
• Port List: Contains a list of all UDP or TCP ports specified for this service.
Adding a service to the service list
To add a service to the Service List using the ACL Assistant:
1. Navigate to Service List.
a. Click the Service tab from the tabular navigation system on the top.
b. Click ACL Management section of the navigation tree on the left.
c. Click the Assistant link located under ACL Management on the navigation tree on the left.
d. Click the Service List option located in the Assistant Management portion of the Service List
page.
The Service List displays in the main pane of the page.
2. Click Add.
The Add Service page appears.
3. Enter a name for the service in the Name field.
A valid length is 1-32 characters. A service name cannot begin with a number.
4. Enter a brief description for the service in the Description field.
5. Enter a port number in the Port field.
A valid port entry includes a port number in the rage from 0-65535.
6. Click Add.
7. Do one of the following:
{
To enter more than one port, repeat Step 5.
{
To remove a port number, select the port and click Delete.
{
To remove all ports in the list, click Delete All.
8. Click OK to create the service.
Once you have created a service, you can enter it in the Variable Port field when you have
selected TCP or UDP as the protocol for an Advanced rule when creating an ACL template. For
more information using a service when defining a rule in an ACL template, see " Creating ACL
templates ."
Modifying a service in the service list
To modify a service in the Service List using the ACL Assistant:
1. Navigate to Service List.