H3C Technologies H3C Intelligent Management Center - Manual (Page 748)

734
more comprehensive and technology specific performance monitoring, allowing you to create custom
global monitors to expand the set of global performance monitors.
Once you have configured global monitors, these monitor settings can be applied to individual devices
using the Monitoring Settings feature within the Performance Management service.
Accessing global index settings
All global monitors are listed in the Global Index Settings list in IMC.
To access the Global Index Settings List:
1. Navigate to Resource > Global Index Settings:
a. Click the Resource tab from the tabular navigation system on the top.
b. Click Performance Management link on the navigation tree on the left.
c. Click Global Index Settings under Performance Management from the navigation system on
the left.
The Global Index Settings page displays with monitors grouped by type.
2. To view the individual monitors, click the expand icon located to the left of the group name.
• Index Name: Contains the name for the monitor index.
• Threshold 1: Contains the value of the first threshold for the associated monitor index.
• Alarm Level: Contains the severity or alarm level for alarms that are generated when the condition
of the first threshold is met.
• Repeat Time: Contains the number of sequential data samples that must be collected and meet the
first threshold value to trigger an alarm in IMC.
• Threshold 2: Contains the value for the second threshold for the associated monitor index.
• Alarm Level: Contains the severity or alarm level for alarms that are generated when the condition
of the second threshold is met.
• Repeat Time: Contains the number of sequential data samples that must be collected and meet the
second threshold value to trigger an alarm in IMC.
• Interval (Sec.): Contains the sampling interval in seconds for the associated monitor.
3. If the Global Index Settings list contains multiple entries, the navigational icons shown below may
appear:
{
Click to page forward in the Global Index Settings list.
{
Click to page forward to the end of the Global Index Settings list.
{
Click to page backward in the Global Index Settings list.
{
Click to page backward to the front of the Global Index Settings list.
{
Click at the bottom of the Global Index Settings list to refresh the list.
4. Enter a page number in the text box to the right of the navigational icons to quickly go to that page.
Searching global index settings
To query the Global Index Settings:
1. Navigate to Resource > Global Index Settings: