H3C Technologies H3C Intelligent Management Center - Manual (Page 395)

381
To save device configurations using batch mode:
1. Navigate to Resource > Batch Operation > Save Configuration:
a. Click the Resource tab from the tabular navigation system on the top.
b. Click Resource Management on the navigation tree on the left.
c. Click Batch Operation under Resource Management from the navigation system on the left.
2. Click the Save Configuration link from the Device Configuration section of the Resource > Batch
Operation page.
3. Click Add to select the devices to apply this batch mode operation to.
You can add devices using either the View or Advanced query option. See "
Adding devices by
View " and " Adding devices by Advanced query ."
4. Run the batch mode save configuration task now or schedule it to run once at a later date by
selecting from the following:
{
To run the batch mode save configuration task now, select Immediately from the Schedule
Information list, or
{
To schedule the task to run once in the future, select Once.
If you selected Once:
a. Enter a date and time in the field next to the Schedule Information.
b. Enter the date and time manually or enter it by clicking the field.
A popup calendar appears.
c. Select the date from the calendar. To enter it manually, the valid date format is YYYY-MM-DD
HH:MM:SS where YYYY refers to the four-digit year, MM refers two-digit month, DD refers to
the two-digit day, HH refers to the two-digit hour, MM refers to the two-digit minute, and SS
refers to the two-digit second values.
5. Click OK.
The Plan List displays along with the status of the batch mode operation task in the Status field.
6. Click Refresh to update the Plan List and the Status field.
When the task is complete, the Status field updates to Finished.
7. Click the Details icon associated with the task to view detailed results of the batch mode task.
If you opted to run the batch mode operation at a later date, you can review the results of this batch
operation task by clicking on Edit Plan to the right of Save Configuration.
Using batch mode to reboot devices
Using batch mode, you can reboot one or more devices. You can also schedule IMC to run the reboot
device batch operation once.
To reboot devices using batch mode:
1. Navigate to Resource > Batch Operation > Reboot Device:
a. Click the Resource tab from the tabular navigation system on the top.
b. Click Resource Management on the navigation tree on the left.
c. Click Batch Operation under Resource Management from the navigation system on the left.
2. Click the Reboot Device link from the Device Configuration section of the Resource > Batch
Operation page.
3. Click Add to select the devices to apply this batch mode operation to.