H3C Technologies H3C Intelligent Management Center User Manual
Page 670
656
•
Click the Expand all icon located in the upper right corner of the Select Trap dialog box to
expand your view to display all traps.
You can also use the query function located at the top of the Select Trap dialog box to locate the
trap you want to add. Fuzzy matching is supported so partial and complete search criteria is
acceptable. Enter one or more of the following search criteria:
•
Trap Name: Enter a partial or complete object name for the trap you want to locate in the Trap
Name field.
•
Trap OID: Enter a partial or complete Object ID for the trap in the Trap OID field.
•
Enterprise Name: Enter a partial or complete name for the Enterprise MIB you want to locate in the
Enterprise Name field.
•
Enterprise OID: Enter a partial or complete Enterprise ID for the MIB you want to locate in the
Enterprise OID field.
11.
Click Query to submit your search criteria.
The results of your query display in the dialog box.
12.
Click Reset to clear your query criteria and to restore the full list of MIBs and traps.
13.
Click on the radio button to select the trap that you want to add.
14.
Click OK.
It might take a while for the Select Trap dialog box to close. When it does, it updates the Alarm
Trap Name field with the configured trap.
15.
If you selected By Trap in the Filter Mode list, you also need to select the devices to apply this trap
filter rule for.
CAUTION:
If you select By Trap as your Filter Mode without selecting the devices, then the trap filtering defined in the
rule applies to all devices.
16.
Click Select located to the right of the Devices to Filter field. The Select Devices dialog box appears.
17.
Add devices either By View or using the Advanced query option. See "
"
Adding devices by Advanced query
18.
If the selected trap has parameters, click Parameter Settings and set alarm parameters for each
device on the Set Alarm Parameters window that appears, and click OK. For more information
about setting alarm parameters, see "
."
19.
Click Select View located to the right of the Custom View field, and click the Expand icon to the
left of the Custom View on the window that appears. Select one more subviews and click OK.
20.
If the selected trap has parameters, click Parameter Settings and set alarm parameters for each
view on the Set Alarm Parameters window that appears, and click OK. For more information
about setting alarm parameters, see "
."
21.
Select the period of time to which this trap filter rule applies from the Validity Period Configuration
dropdown list.
22.
Select Weekly if you want to define the days of the week and the hourly range.
23.
Click on the checkbox next to the day of the week that you want to apply this trap filter rule to.
Click on the checked box to remove the rule for that day.
24.
Select By Time Range if you want to set a specific date and time range for this trap filter rule.
25.
If you selected By Time Range, enter: