H3C Technologies H3C Intelligent Management Center - Manual (Page 225)

211
Viewing the special workday configuration page
To view the special workday configuration page:
1. Navigate to System > Work Time Settings:
a. Click the System tab from the tabular navigation system on the top.
b. Click System Configuration section of the navigation tree on the left.
c. Click Work Time Settings under System Configuration from the navigation system on the
left.
The Work Time Settings page appears.
2. Click the Special Workday tab.
The special workday configuration page appears.
{
Date: Contains the date of the special workday, in the format of YYYY-MM-DD.
{
Time Range: Contains the time ranges of the special workday. The work time ranges are
displayed in green, and the free time ranges are displayed in gray.
{
Description: Contains a description of the special workday.
{
Modify: Contains a link for entering the page for modifying the special workday.
{
Delete: Contains a link for deleting the special workday.
3. Click Refresh to update the Special Workday page.
Configuring special workdays
You can define a non-workday as a special workday for a work shift.
To configure a special workday:
1. Navigate to System > Work Time Settings:
a. Click the System tab from the tabular navigation system on the top.
b. Click System Configuration section of the navigation tree on the left.
c. Click Work Time Settings under System Configuration from the navigation system on the
left.
The Work Time Settings page appears.
2. Click the Special Workday tab.
3. Click Add to enter the Add Special Holiday page.
4. Enter a date of the special workday in the Date field, or click the field to select a date. The valid
date format is YYYY-MM-DD.
5. Enter a description of the special workday in the Description field.
6. Configure the work time ranges of the special workday:
a. Click Add in the Time Range List to launch the Add Time Range window.
b. Select the start time from the Start Time list.
c. Select the end time from the End Time list.
d. Click OK.
Repeat Steps a through d to add more working time ranges.
e. Click the Delete icon of a time range to delete the time range.
7. Click OK.