H3C Technologies H3C Intelligent Management Center - Manual (Page 287)

273
8. To delete an invalid stack member, right-click the invalid stack member in the stack topology map
and select Delete Stack Member from the shortcut menu.
9. Click OK.
Viewing traffic with traffic topology
The traffic topology enables you to view the traffic conditions of links of the specified type in the custom
topology.
To view the traffic from the traffic topology:
1. Click the Resource tab from the tabular navigation system on the top.
2. Click View Management on the navigation tree on the left.
3. Click Network Topology(Applet) under View Management from the navigation system on the left.
4. Double click any custom topology under Custom Topology.
A new page for the Custom Topology displays in the main pane. Multiple pages in the main pane
can be navigated using the tabs located at the top of the main pane.
5. Click the icon. The following menus appear:
{
Traffic Topology Index: Allows you to decide which index denotes the traffic of the link on a
topology map.
{
Link Type of Traffic Topology: Allows you to decide which type of the link displays the traffic on
a topology map. Options include All links, Core links, Links to servers, and Link to PCs. Core
links refer to links connecting network devices. Links to servers refer to links connecting network
devices to servers. Links to PCs refer to links connecting network devices to PCs.
{
Show: Identifies the link traffic load status by color. This option is available when No Index is
not selected for Traffic Topology Index. The Show feature provides the Traffic Labels and Traffic
load options.
{
Traffic labels: Displays the values of the indexes selected in Traffic Topology Index over links,
and displays the values in different background colors according to the level-1 and level-2
thresholds set in the global indexes. If the traffic over a link is normal, the background color of
the index values is the same as the background color of the traffic topology.
{
Traffic load: Displays links in different colors according to their traffic load conditions. The
system has pre-defined traffic ranges for each index in the Traffic Topology Index. After you
select an index in the Traffic Topology Index, the links are divided into three sections, and the
middle part displays the status of links. The links in the left part and the links in the right part are
displayed in different colors according to the ranges of traffic over the left interfaces and the
right interfaces.
6. Customize the traffic range thresholds and their corresponding colors in the Traffic load
parameters.
7. Add a file userDefined.xml in directory \client\conf\perf\trafficTop in the IMC installation path.
8. Configure the traffic range thresholds and their corresponding colors in the file userDefined.xml.
For example, task id=1 corresponds to the index Interface Transmitting Rate. By setting the min
and max parameters for the region parameter and setting rgb-r, rgb-g, and rgb-b values for the
color_value parameter, you can set different colors for different threshold ranges.
For more information, see the system-defined configuration file systemDefined.xml. IMC
preferentially uses the configurations in the file userDefined.xml. At the same time, do not modify
the configurations in the system-defined configuration file systemDefined.xml.
The traffic topology feature applies only to the current topology.