H3C Technologies H3C Intelligent Management Center User Manual
Page 578
564
{
If the Task Sub Type is Restore Device Configuration, the Restore Device Configuration page
appears. For information about operations on the page, see "
Restoring a device configuration
In these steps, do not modify the Task Name in Step 13.
{
If the Task Sub Type is Restore Device Software from NMS or Restore Device Software from
Device, the Deploy Software page appears. For information about operations on the page, see
." In these steps, do not modify the Task Name in Step 14.
{
If the Task Sub Type is any other value, go to Step 7.
4.
Select the type of deployment schedule you want to apply to this task from the Schedule Type list.
Options include Once and Cycle. Select Once if you want IMC to execute this task one time. Select
Cycle if you want this configuration deployment task to be executed on a scheduled basis.
5.
If you selected Once in the Schedule Type field, complete the following steps:
a.
Select the time you want IMC to execute this task from the Schedule Time list. Options include
Immediately and Scheduled. If you selected Immediately, go to Step 13.
b.
If you selected Scheduled, click on the calendar icon
to populate the date and time for the
execution of this task. A popup calendar appears. Select the date from the calendar. Go to
Step 13.
6.
If you selected Cycle from the Schedule Type list, complete the following steps:
a.
Select the frequency with which you want IMC to execute this task from the Operation
Frequency list.
b.
If you selected Every Week from the Operation Frequency list, select the date of the week you
want IMC to execute this task from the list to the right of the Operation Frequency list.
c.
If you selected Every Month from the Operation Frequency list, select the day of the month you
want IMC to execute this task from the list to the right of the Operation Frequency list.
7.
Enter the time you want IMC to execute this task in the field to the far right of the Operation
Frequency list. Enter the time in HH:MM:SS format where HH denotes a two digit hour value, MM
denotes a two digit minute value and SS denotes a two digit second value.
8.
Enter the beginning date and time you want IMC to execute this task in the Start Time field. Click
the calendar icon
to populate the date and time for the execution of this task. A popup
calendar appears. Select the start date from the calendar.
9.
Enter the ending date and time you want IMC to execute this task in the End Time field. Click the
calendar icon
to populate the date and time for the execution of this task. A popup calendar
appears. Select the end date from the calendar.
10.
Select how you want IMC to execute the deployment of configuration files to every device in the
deployment task from the Schedule Sequence list. Two options are available: Concurrent and
Sequential. If you select Concurrent, IMC executes the deployment to multiple devices
simultaneously. If you select Sequential, IMC deploys the configuration file to one device at a time.
11.
If you select Sequential from the Schedule Sequence list, you can also define the order in which
IMC uses to deploy the selected configuration file or segment as follows.
12.
Click Sort located to the right of the Schedule Sequence list. The Sort dialog box appears.
13.
Click the checkbox to the left of the devices you want to move.
14.
Do one of the following:
{
Click Up to move the devices up in the list.
{
Click Down to move the devices down in the list.
15.
Do one of the following: