H3C Technologies H3C Intelligent Management Center - Manual (Page 783)

769
2. Click Monitor List located in the upper right corner of the Real-Time Monitoring window.
3. Select Delete.
4. Click OK to confirm the deletion.
Managing monitor graphs
A monitor graph displays performance monitor data for one or more devices.
Viewing Monitor Graphs
Open the Real-Time Monitoring window to the history monitor and its monitor graphs when you closed
the window last time. For more information about accessing monitor graphs, see " Viewing real-time
monitoring window ."
A monitor graph has the graph name located in the top middle, a tool bar under the graph name,
performance data table or graph under the tool bar, and monitor instances at the bottom of the monitor
graph. To modify or delete a monitor graph, click Set in the upper right corner of the monitor graph.
In the bar graph, the X-axis denotes the time, and the Y-axis denotes the performance data. The graph
displays the performance data for one or more devices at a specified time.
Under the graph are the items of the monitor instance name. If there are several instances, the instances
are distinguished by colors. Click a monitor instance name link to hide the line for the monitor instance
in the monitor graph and gray out the monitor instance name. Click the monitor instance name link again
to display the line for the monitor instance in the monitor graph.
Adding a monitor graph
You can add one or more monitor graphs to a monitor.
To add a Monitor Graph:
1. Navigate to Resource > Real-Time Monitoring:
a. Click the Resource tab from the tabular navigation system on the top.
b. Click the Performance Management link on the navigation tree on the left.
c. Click Real-Time Monitoring under Performance Management from the navigation system
on the left.
The Real-Time Monitoring window appears.
2. Click the Add Monitor Graph button located in the top tool bar.
The Add Monitor Graph dialog box appears.
3. Enter a name for the graph in the Graph Title field.
4. Enter a name for the monitor item of this graph in the Y-Axis Name field.
5. Enter a unit for the monitor item of this graph in the Y-Axis Unit field.
6. Add the monitor instance:
a. Click the Add Monitor Instance button in the Monitor Instance Information area.
The Add Monitor dialog box appears.
b. Click the Add button in the Select Index area.
The Select Index dialog box appears.
c. Select Common Index or All Index.