H3C Technologies H3C Intelligent Management Center - Manual (Page 361)

347
If the Configure Interface 802.1X Status list contains multiple entries, the following navigational
aids may appear:
{
Click to page forward in the Configure Interface 802.1X Status list.
{
Click to page forward to the end of the Configure Interface 802.1X Status list.
{
Click to page backward in the Configure Interface 802.1X Status list.
{
Click to page backward to the front of the Configure Interface 802.1X Status list.
2. Click Enable 802.1X or Disable 802.1X to enable or disable 802.1X from all interfaces on the list.
Virtual connect
VC is a network interconnected technology to replace traditional switch connections and management.
VC reduces network costs in various aspects. For example, it reduces cabling cost and complexity, and
allows pre-provision of network assignments. VC also simplifies blade server connectivity to production
LANs, SANs and converged networks. The VC technology uses an abstraction layer between servers and
their external networks to virtualize I/O connections, and displays network interface (NIC) and host bus
adapter (HBA) addresses on LANs and SANs, instead of the default physical interface addresses.
IMC offers virtual connect management, allowing you to configure Ethernet network, FC, FCoE, and
iSCSI connections and server downlink port mappings.
1. Click the Virtual Connect link located under the Device Management section of the right navigation
tree on the selected device's Device Details page.
The Virtual Connect window appears.
2. Click a tab on top of the window to enter the corresponding configuration page. The tabs include
Ethernet Network Connections, FC SAN Connections, FCoE Connections, iSCSI Connections, and
Server Port Mappings.
3. Click Add.
On the window that appears, you can configure the following parameters:
• Ethernet Network Connections
{
Profile Name
{
Network
{
PXE
{
Address Type
{
Ethernet MAC
{
iSCSI MAC
{
Speed Type
{
Speed
• FC SAN Connections
{
Profile Name
{
Fabric
{
Speed
{
Address Type
{
Port WWN
{
Node WWN