H3C Technologies H3C Intelligent Management Center - Manual (Page 486)

472
Creating a vendor folder
Query the vendor name in IMC, and then create the vendor folder.
Query the vendor name:
1. Navigate to System > Resource Management > Device Vendor
a. Click the System tab from the tabular navigation system on the top.
b. Click Resource Management on the navigation tree on the left.
c. Click Device Vendor under Resource Management on the left navigation.
Enter the Device Vendor List page.
2. Enter the third-party device vendor name in the field on the left of Vendor Name.
3. Click Query to display all matching vendor names on the Device Vendor List. Locate the target
vendor name.
If the target vendor does not exist, you can customize the vendor, series, and model. For more
information, see "
Configuring vendor and device information ."
4. Create a folder under the directory <IMC installation directory>\IMC\server\conf\adapters\ICC.
5. Specify the target vendor name as the folder name.
Creating a drive index file and a drive folder
A vendor can provide devices of multiple series or models. These devices can use the same or different
drive files for communication between each other. To manage the mappings between devices and drive
files, create a drive index file and then create a drive folder for each drive.
1. Open the third-party device vendor folder.
2. Create a drive index file named adapter-index.xml.
3. Create a drive folder (with customized name) for target devices. The drive corresponds to the
devices with similar command lines for configuration back and deployment and software upgrade,
for example, Cisco CatNative series.
4. Query the target third-party device model.
a. Navigation to System > Resource Management > Device Vendor
b. Click on the System tab from the tabular navigation system on the top.
c. Click the Resource Management on the navigation tree on the left.
d. Click the Device Model under Resource Management from the navigation system on the
left.
e. Enter the Device Model List page.
f. Enter the query criteria, and click Query to display all matching device models on the Device
Model List.
5. Get the sysOID of the target third-party device.
6. Open the adapter-index.xml file, and create a drive folder for the device with the specified sysOID.
You must create a drive folder for each drive, and use the drive name as the folder name. The
format of the adapter-index.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<!--sysOID adapt adapter-->
<adapters> <!—note 1>