H3C Technologies H3C Intelligent Management Center - Manual (Page 654)

640
1. Navigate to Service > Display Command.
a. Click the Service tab from the tabular navigation system on the top.
b. Click the Compliance Center on the navigation tree on the left.
c. Click Display Command under Compliance Center on the left navigation tree.
The Display Command List appears.
2. Click the icon in the Modify field of the display command you want to modify.
You cannot modify the name of a display command once you have created it.
To rename it, you must delete the existing display command and re-create it.
3. Modify the description for the display command in the Description field.
4. Modify the display command in the Content field as needed.
5. Click OK to accept your modifications to the display command.
Deleting configuration display commands
To delete a configuration check display command:
1. Navigate to Service > Display Command.
a. Click the Service tab from the tabular navigation system on the top.
b. Click the Compliance Center on the navigation tree on the left.
c. Click Display Command under Compliance Center on the left navigation tree.
The Display Command List appears.
2. Click the icon in the Delete field of the display command you want to delete.
3. Click OK to confirm the deletion of the display command.