H3C Technologies H3C Intelligent Management Center User Manual
Page 111
97
Figure 52 IP Topology widget contents
When you click a device icon or a link, a tip appears and displays the basic information for the device
or the link.
You can right-click the custom topology and select one of the following options from the shortcut menu:
•
Zoom in: Enables you to zoom in on the topology view.
•
Zoom out: Enables you to zoom out on the topology view.
•
1:1: Displays the network in its original proportion.
•
Auto Fit: Enables you to fit the contents of the topology view into the window.
•
Layout: Enables you to organize icons according to a pre-defined structure to the topology view.
Options for organizing topology views include Union Length, Tree, Star, Ring, and Grid.
To configure the IP Topology widget:
1.
Navigate to the view configuration window:
a.
Point to the icon located at the top of the left navigation tree.
A list of predefined and user-defined favorites appears.
b.
Point to the Display Tiling folder option.
The popup list appears.
c.
Click
Configuration in the popup list.
The view configuration window appears.
2.
Drag the IP Topology widget from the widget area to the panel.
3.
Right-click the IP Topology widget, and then select Configure Parameters from the shortcut menu.
The Configure Topology window appears.
4.
Select the Use the background color of the topology configuration option to use the color of the
topology configuration as the background color. If this option is not selected, the background
color is determined by the screen tiling configuration.
5.
Set the refresh interval for the custom topology.