H3C Technologies H3C Intelligent Management Center - Manual (Page 424)

410
1. Navigate to Resource > IP Address Allocation.
a. Click the Resource tab from the tabular navigation system on the top.
b. Click Terminal Access on the navigation tree on the left.
c. Click IP Address Allocation under Terminal Access from the navigation tree on the left.
The IP Segment List is displayed in the IP Address Allocation page.
2. Click the Modify icon associated with the IP address allocation you want to modify.
3. Select a format in which you want to specify the IP segment from the IP Segment Input Format list.
Options include Subnet IP and Start IP and End IP.
4. Enter the IP segment in either of the following formats:
• If you have selected Subnet IP, enter an IP segment in the IP address/mask format such as
192.168.1.1/24 and 192.168.1.1/255.255.255.0.
• If you have selected Start IP and End IP, enter the first IP address to be allocated in the Start IP field
and the last IP address to be allocated in the End IP field. The last IP address must be greater than
the first IP address.
5. Modify the owner of the IP segment that is granted the IP segment in the Owner field as needed.
6. Re-select the operator group in the Operator Group field for performing this IP segment. You
cannot perform this operation in a child IP segment.
7. Modify the description for this IP segment in the Description field.
8. Click OK.
Deleting an IP segment
To delete an existing IP segment:
1. Navigate to Resource > IP Address Allocation.
a. Click the Resource tab from the tabular navigation system on the top.
b. Click Terminal Access on the navigation tree on the left.
c. Click IP Address Allocation under Terminal Access from the navigation tree on the left.
The IP Segment List is displayed in the IP Address Allocation page.
2. Click the Delete icon associated with the IP segment you want to restore.
3. Click OK to confirm the restoration of the IP segment.
4. Review the results of the operation on the IP Address Allocation page.
Querying allocated IP addresses
To query allocated IP addresses:
1. Navigate to Resource > IP Address Allocation > <IP Segment Range>.
a. Click the Resource tab from the tabular navigation system on the top.
b. Click Terminal Access on the navigation tree on the left.
c. Click IP Address Allocation under Terminal Access from the navigation tree on the left.
2. Click the IP segment in the IP Address field of the IP Segment List that you want to allocate an IP
address from.
The Allocated IP List for the selected IP segment is displayed in the dialog box that appears.
3. Click Query.
The IP Address Allocation Query dialog box appears.