H3C Technologies H3C Intelligent Management Center - Manual (Page 1049)

1035
4. Verify that the name is unique.
5. Modify the type of report by selecting a new template type in the Type field.
6. To add or remove group names, do one of the following:
{
Click the checkbox next to the group names you want to add.
{
Click the checked box next to the group names you want to remove.
7. Click OK.
You cannot modify a Real Time template's Location or Report Data Source.
Adding a real time report template
You can create user-defined templates for Real Time reports (usually of the Overall Report type) by
importing iAR report templates.
To add a Real Time report template:
1. Navigate to Report > Add Report Template:
a. Click the Report tab from the tabular navigation system on the top.
b. Click Reports on the navigation tree on the left.
c. Click Add Report Template under Reports from the navigation system on the left.
2. Click the Upload button.
The Upload Template window appears.
3. Click Browse located to the right of the Template File field to select a template file.
This step is required and you can only select an RPT file with the file name consisting of letters,
digits, and underscores (_).
4. Click Browse located to the right of the Parameter File field to select a parameter file.
This step is optional and you can only select an XML file with the file name consisting of letters,
digits, and underscores (_).
5. Click OK.
6. Select the data source from the Report Data Source list.
7. If you have not defined multiple data sources, select Local (127.0.0.1).
For more information about data source, see "
Managing real time report data sources ."
8. Enter the name for the template in the Template Name field.
9. Verify that the name is unique.
10. Select the type of report by selecting a template type in the Type field.
11. If you are not sure about the template type, select the Overall Report type.
12. Select the groups to have access to this report by clicking the checkbox next to the group names
you want to add.
13. Click OK.
The Adding Real Time report template function is available without the need of a license in IMC
trial versions. To use this function in an IMC retail version, you must purchase a license.
Managing real time reports
Real Time reports are those reports that offer resource statistics, configuration and change, fault or alarm
and performance reporting on network devices and interfaces, users and services. You can schedule