H3C Technologies H3C Intelligent Management Center User Manual
Page 852
838
To add an advanced rule set to an existing ACL resource:
1.
Navigate to ACL Resource:
a.
Click the Service tab from the tabular navigation system on the top.
b.
Click ACL Management section of the navigation tree on the left.
c.
Click the ACL Resource link located under ACL Management on the navigation tree on the left.
The ACL Resource list displays in the main pane of the ACL Resource page.
2.
Click the ACL Identifier for the advanced ACL for which you want to create a new rule set. Refer to
the ACL Type field in the ACL Resource list for identifying ACLs for which the type is Advanced.
The Rule Set List for the selected ACL displays in the main pane of the ACL Resource > <ACL
Resource Name (ACL Identifier)> page.
3.
Click Add.
The Basic Info step of the Add Rule Set page appears.
Several fields are already configured and cannot be changed. These include the ACL Identifier, the
ACL Type, and the ACL Resource Name. These cannot be changed because they are inherited by
the ACL to which this rule set belongs.
You can create rule sets of the same type as the type of ACL to which the rule set belongs.
4.
Enter a name for the rule set in the Rule Set Name field.
A valid length for a rule set name is 1 – 32 characters.
5.
Select the match order you want to apply to this rule set by clicking the radio button to the left
of the Match Order option you want to use. Options include Config and Auto:
{
Config: IMC matches rules in the order in which they were configured. This feature works only
for devices that support it.
{
Auto: IMC matches rules based on the principle of depth priority.
6.
Enter a brief description for this ACL in the ACL Description field.
A valid length for this field is 0 – 127 characters.
7.
Enter a brief description for this rule set in the Rule Set Description field.
A valid length for this field is 0 – 127 characters.
8.
Do one of the following:
{
If you checked the box to Configure ACL Rules with Time Range, click Add under Configure
Time Range to add a time range to this rule set.
{
If you do not want to add a time range, skip to Step 14.
9.
Enter a name for the time range in the Name field of the Add Time Range page.
Time Range names must begin with a letter [A-Z] and consist of 1-32 characters. Blank spaces [ ]
and question marks [?] are not permitted. Uppercase letters may be converted to lowercase letters
by some devices after deployment.
10.
Click Add to enter a time range.
The Add Time Range dialog box appears.
11.
Select the type of time range you want to create by clicking the radio button to the left of the
desired time range type:
{
Fixed if you want to identify a specific and finite start and end date and time.
{
Cyclic if you want the time range to recur for selected days of the week.
12.
Click Add on the Configure Rule page to configure a new rule.