H3C Technologies H3C Intelligent Management Center - Manual (Page 388)

374
c. Super Password: Enter the Telnet super password in the Super Password field, if prompted.
d. Timeout: Enter the Telnet timeout value configured on the managed device in the Timeout field.
Valid range is 1–60 seconds.
Using existing Telnet templates
1. To configure the Telnet settings for this device using Telnet templates, click the radio button to
the left of Select an Existing Template.
2. Click the radio button to the left of the Telnet template you want to use.
3. Click OK.
4. Click OK to apply the Telnet configuration settings to the selected devices.
The Batch Operation Result page displays once IMC has completed the batch operation.
5. Review the Operation Result field to verify that the requested changes have been made for all
devices.
6. If you want to check the Telnet settings for the devices configured in this batch mode operation,
click Check.
The Check Telnet Settings pane appears.
7. Click OK to check the Telnet settings for all devices in the displayed list.
8. Review the Operation Result field in the Check Telnet Settings List to verify whether or not the Telnet
settings you applied were successful.
Using batch mode to configure SSH settings
You and you can use the IMC batch mode feature to update IMC SSH configuration for one or more
devices.
To add or modify IMC SSH settings for one or more devices in batch mode:
1. Navigate to Resource > Batch Operation > SSH Settings:
a. Click the Resource tab from the tabular navigation system on the top.
b. Click Resource Management on the navigation tree on the left.
c. Click Batch Operation under Resource Management from the navigation system on the left.
2. Click SSH Settings link from the NMS Parameter Configuration section of the Resource > Batch
Operation page.
3. Click Add to select the devices to which you want to apply the SSH settings in the SSH Settings
window.
You can add devices by using either the View or Advanced query option. See "
Adding devices by
View " and " Adding devices by Advanced query ."
4. To configure the SSH settings for selected devices, click on the Configuration icon .
The SSH Parameters dialog box appears.
You can either enter the SSH settings in this dialog box or you can select an existing SSH template
that contains the SSH settings for this device. SSH templates are particularly useful when SSH
configurations are standardized. For more information about creating SSH templates, see " SSH
templates ."