H3C Technologies H3C Intelligent Management Center - Manual (Page 142)

128
c. Click Telnet Template under Resource Management from the navigation system on the left.
IMC displays all Telnet templates in the Telnet Template List displayed in the main pane of the
System > Telnet Template window.
2. Click the Modify icon in the Telnet Template List associated with the Telnet template you want
to modify.
3. Modify the authentication mode setting to match the Telnet authentication mode configured on the
managed devices.
Options include Password, Username + Password, Super Password, Password + Super Password,
Username + Password + Super Password, No Username + No Password, and Username + No
Password.
4. Modify the username to match the username configured on managed devices, if prompted.
5. Modify the password to match the password configured on the managed devices, if prompted.
6. Enter the super password to match the super password configured on the managed devices, if
prompted.
7. Modify the Telnet Timeout value.
Valid range is 1–60 seconds. The timeout parameter defines how long the system waits for the
device to respond in seconds.
8. Click OK.
Deleting a Telnet template
To delete a Telnet template:
1. Navigate to System > Telnet Template:
a. Click the System tab from the tabular navigation system on the top.
b. Click Resource Management on the navigation tree on the left.
c. Click Telnet Template under Resource Management from the navigation system on the left.
IMC displays all Telnet templates in the Telnet Template List displayed in the main pane of the
System > Telnet Template window.
2. Click the Delete icon in the Telnet Template List associated with the Telnet template you want to
delete.
3. Click OK to confirm deletion of the selected Telnet template.
SSH templates
IMC uses SSH to enable secure remote access to managed devices. IMC also uses SSH for certain
network resource management functions.
The SSH template feature allows you to save SSH configuration settings in IMC, which can then be
applied when adding new devices to IMC, performing an auto discovery, or configuring devices in
individual or batch mode. SSH templates store IMC SSH configurations for devices to support IMC
communication with the device. SSH templates do not configure the SSH settings on the device itself.
Viewing the SSH Template List
To view the SSH template list:
1. Navigate to System > SSH Template:
a. Click the System tab from the tabular navigation system on the top.
b. Click Resource Management on the navigation tree on the left.